Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tube Suppliers
#1

I am restoring a Philco 38-12 and in need of the following tubes, 41, 75, 78 and 6A7. Used tubes are ok. Any suggestions what suppliers would offer the best pricing? Thanks.
#2

Google ESRC Tubes.
#3

Hey BA,
Just where is "Way over yonder"? Icon_confused:

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#4

Pyeongtaek, Korea. About 50 miles S. of Seoul
#5

Wow! What brought you there, the military?

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#6

Getting back to tubes,

VTI in Florida is a great place run by an honest guy.

http://vacuumtubesinc.com/

DG

Pacing the cage...
#7

I'll second Conelrad's recommendation on VacuumTubesInc.com.

I've ordered from Jim a couple of times and also spoke with him on the phone once or twice. He's super nice and super helpful.

It's not how bad you mess up, it's how well you can recover.
#8

I'm also restoring a 38-12. I found some great prices, as always, at AES. http://www.tubesandmore.com/

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#9

Bob Dobush at FindATube has been reliable with good prices: http://www.findatube.com/
#10

Must add Alton Smith down in Louisiana, fast freindly reasonable.

http://antiqueradiotubes.com/

Paul

Tubetalk1




Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 10318 online users. [Complete List]
» 3 Member(s) | 10315 Guest(s)
AvatarAvatarAvatar

>