Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
I got this old Philco a while back. Not sure what model it is, but a 54, 57 or 59 I think.
When I got it, it was painted the UGLIEST shade of brown. It's SO ugly I can't even describe it without using some of Carlin's "Seven Words"..
Last night, after having finished the chassis restoration, I commenced to strip that awful paint off, figuring that anything I could do to it would have to be an improvement. Imagine my surprise and befuddlement when I found what was underneath:
Now, WHY would anyone cover this beautiful grain with that horrid paint? The white spot on the upper left is wood putty where I'm patching a bit of a gouge before I refinish it.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
It's a model 57C. Yes, looks much better without the brown paint.
Who knows what motivates people to paint things which were never painted originally. Myself, I will never understand the logic (or, more appropriately, the lack thereof) of painting things white, making them look "distressed" and adding some decals, then selling it as "shabby chic." I have a different name for it...substituting one of Carlin's seven words for "chic"... 
--
Ron Ramirez
Ferdinand IN
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
+ One Brenda, I'am glad to see you got a hold of that radio. Looks like it will clean up nicely.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Great job and really lovely looking wood Brenda. At least it wasn't painted white! Who knows why it would be painted? Let's see how it goes together and looks when your done.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Ron,
Do I need to find a PHILCO decal for this? It seems to be missing something...
Posts: 5,129
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Brenda
What Bob said, plus you'll want a DCL-PH8 from Radio Daze to replace the missing PHILCO decal.
--
Ron Ramirez
Ferdinand IN
Posts: 4,826
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
There is one benefit to someone painting a wood cabinet with a thick layer of paint, it does an excellent job of protecting the wood from dents and gouges. It also turns off a lot of potential buyers making such radios cheaper to buy.
Regards
Arran
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Good point, Arran. 
Thanks Ron and Bob. I ordered the decals and some knob washers.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Does anyone do repros of the brass foil dial?
Posts: 4,826
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I wish I knew of someone reproducing the foil dials, I know of a Rogers "Pee wee" set like that Philco that has the same problem. Radio Daze was hinting that they might make some foil dials so you may check with them. They are sort of strange, it's like a heavy aluminum foil that was pressed to give a faux medallion relief effect, in the case of the Rogers I saw the background was painted black. It's too bad that they didn't make them like the brass and aluminum serial number plates, then you could clean them up and repaint them.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
What should I offer?
|
| I think you have a chance at purchasing a 48-1286, based on the cabinet hardware. Only 8700 were produced, so it is a r...GarySP — 02:28 PM |
|
What should I offer?
|
| I am not sure what radio it is, but seems like a 1950 AM/FM set. Or from 1948, possibly one similar to 48-1264.
In any ...morzh — 12:44 PM |
|
What should I offer?
|
| I have an opportunity to acquire this radio-phono, but the owner wants me to make an offer. Tried searching images, but...nocusr — 12:29 PM |
|
Atwater-Kent 84, restoration.
|
| So, I unwound the coil; it is 700 turns of AWG40 wire. I modeled it on a couple of different calculators and I got about...morzh — 12:29 PM |
|
Atwater-Kent 84, restoration.
|
| Ron
From the conversation, it was my impression he was a pretty old dude who is looking to place his radios in good h...morzh — 12:16 PM |
|
Philco 49-1040
|
| Yes, and it's surprisingly common for early TVs to be mostly or all original. My thinking is that they were retired ear...Bob Andersen — 11:59 AM |
|
91H Code 126 Restore
|
| Hi Nick,
Usually the dashed lines connected to components means the part is a substitute in the circuit for specific ...RodB — 09:42 AM |
|
462ron
|
| Mike when I got to the guy’s house to pick up the set, he gave me a tour of his home and garage. Wow, his living room co...462ron — 09:10 AM |
|
91H Code 126 Restore
|
| I'm pretty sure that the dotted line I circled in an earlier post signifies that it is applicable to the 226 model which...RealRider — 08:05 AM |
|
Philco 49-1040
|
| Hello bob,
that underside looks like it is all original !
Sincerely Richardradiorich — 02:07 AM |
|
Who's Online
|
There are currently 2746 online users. [Complete List]
» 1 Member(s) | 2745 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
