[Bradley Rush]

Have not been able to find the Dial String for 38_15. I think it was on wrong and wrapped around the upper shaft. Here is my best guess. I saw a 38_14 on the site but could not verify the string. Thx in advance

http://s1289.photobucket.com/user/TROG99...d.jpg.html

I have been using hemp twine and 3/16" brads to secure the string to the dial. Any tips I will be doing this shortly.

[BrendaAnnD]

Assuming that the tuner is in the fully meshed position in your drawing, I would add one turn around the pulley going counterclockwise. The tuning shaft should have at least 2 1/2 turns around it. No turns around the upper shaft, it's just there for tensioning.

YMMV

[Bradley Rush]

http://s1289.photobucket.com/user/TROG99...7.jpg.html

tHX BrendaAnnD I have the pic above now. So more like it?