Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Thoughts on a McMurdo Silver Masterpiece VI Speaker
#76

Ron,
I say go for it . Just don't start turning consoles into clothes hampers.
Henry
#77

Ron ..That was the way to go why spend thousands on a speaker when you can make a couple of adjustments and put another speaker in its place. What are so special about the speaker that came with the set? With todays know how the speakers of today should be a lot better than the ones of the 1930's as long as they can be retrofitted. Let me know what you think.
#78

Hi all. what is the tube layout for the power amp for the Mcmurdo V1 power amp?
#79

(02-22-2013, 05:43 PM)morzh Wrote:  If this thing drops in your lap.....you won't be able to think of anything else for a while. I promise you. Icon_biggrin

Sore Bawlz Time, for sure!
#80

Talk about a speaker having an impact!
#81

Ron,

Thank you for the impedance info on the double field coil in post #10. I was able to test a Masterpiece V last week for my boss after wiring up a suitable choke, resistor, and output transformer based on your measurements. Now that we know the radio works, we can box it up and store it away for future work.

Thanks again,

Whirligig




Users browsing this thread: 25 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM

[-]
Who's Online
There are currently 10584 online users. [Complete List]
» 2 Member(s) | 10582 Guest(s)
AvatarAvatar

>