Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX
Assuming I get the electronic rebuild done soon, I'll want to finish the cosmetic parts of the restoration. I'm mostly done there. The cabinet finish was decent to begin with, but I did some veneer replacement on the front around the outside of the grill and feathered the new bits in so they look fairly seamless. The grille cloth was toast, but I wen with a compromise I can live with although I somehow stained a part of it, so I will at some point have to redo it.
The knobs on this set, though, are rosettes. Every photo I've seen shows acorn knobs. These knobs appear to be quite old, and made of Bakelite, so if a substitution was made, it was made with old parts. The cabinet is a cathedral instead of a tombstone. Should I have acorn knobs for this set?
Charlie in San Antonio
Posts: 16,213
Threads: 562
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
My cabinet (see the tread, Kirk is running it) has those black robbed knobs, not sure what they are called.
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
The few "cathedral" 66's ive seen had the rosette but the 89's that use the same cabinet with different knob location have the 6 sided knobs. Ive only seen a couple and they may or may not have been original.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
--
Ron Ramirez
Ferdinand IN
Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX
As I feared. Are those small, medium, or large. They all look to be the same size.
Charlie in San Antonio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Most photos I see of the 66B cathedral have four small hex knobs.
However
The Philco Service Bulletin for Model 66 calls for a large hex knob (27-4051) and small hex knobs (27-4052).
If it were my set, I would therefore use a large hex knob for tuning and three small hex knobs for tone, band selector, and off-on-volume.
--
Ron Ramirez
Ferdinand IN
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
I agree. +1. Just find a large one and you'll have an extra small one to bargain with.
Chuck
Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX
Great information, just what I was looking for. Now, the hunt. There's time. The radio doesn't work, yet, but I am kind of proud of the job I did on the cabinet.
Charlie in San Antonio
Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX
I found a complete set (three small and one larger one) on Ebay. What is a decent price for a set?
Charlie in San Antonio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Used knobs seem to go for around $5-6 apiece, I think.
I don't think I would spend more than $25-30 plus shipping.
--
Ron Ramirez
Ferdinand IN
Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX
Thanks. It looks like I'm right on the money, then. $35 and free shipping.
Charlie in San Antonio
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
| UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM |
|
Philco 91 Schematic
|
| Hi Rod,
The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM |
|
Just got a 49-1613 need to know...everything!
|
| I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM |
|
B&K 1077B no video
|
| Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
|
B&K 1077B no video
|
| I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
|
RCA 15X
|
| I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
|
B&K 1077B no video
|
| Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
|
RCA 15X
|
| Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM |
|
Philco 91 Schematic
|
| Hi Dan,
I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM |
|
6TPZ and 5TPO Radio Help
|
| I suspect it's been repaired before.
And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM |
|
Who's Online
|
There are currently 10487 online users. [Complete List]
» 2 Member(s) | 10485 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
