Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Canada 39 or 41-722 Tropic
#46

(11-13-2014, 08:34 AM)mikethedruid Wrote:  I am not sure, and don't have the records handy to check, but one reason for the difference between US and Canadian wire type, rubber covered vs. cloth covered, could be a difference between UL and CSA requirements at the time.

I suspected as much.

But what I find really interesting is that the IF transformers have/had rubber-covered leads! So I can't help but wonder how many of the parts were actually imported from USA Philco and then assembled into radios in Canada.

The two electrolytic capacitor cans in my 39, as well as the lone bakelite block, are all stamped "Made in U.S.A."

--
Ron Ramirez
Ferdinand IN
#47

 No, the Canadian electrical code had nothing to do with the lack of rubber wire in Canadian built Philcos, Rogers as well as Canadian RCA and G.E used yards of the stuff in that era, especially Rogers which used almost nothing but rubber wire, except for external wires, it it were illegal then none of them would have used rubber wire.
Regards
Arran
#48

Ron,
  We are all at various levels of knowlege and experience. I have had an interest in old radios for 50+ years. I really enjoy making them come to life again. Also I enjoy listening to and looking at them. However I never gave a lot of thought to " restoration " and certainly never seriously considered restuffing a capacitor just for looks.
  After joining this forum and seeing what others do and how it is done I better understand some aspects of why people go to that length. So I say keep up with the resoration articles because they are enjoyable and educational.
                                     Thanks for all you do.
                                                     Henry
 
#49

Henry

Thank you! I've been messing around with vintage radios for a little over 40 years now, since I was 14 years old. You do the math. 14 + 40 = old. Icon_lol

(and don't tell anyone, but I once experimented with restuffing paper caps using melted wax, decided it was too much work, and abandoned the idea until just recently, when I started restuffing paper caps again, using hot glue instead of wax to reseal them.) Icon_wink

--
Ron Ramirez
Ferdinand IN
#50

Ro,
 Your secret is safe with me.
                      Henry




Users browsing this thread: 24 Guest(s)
[-]
Recent Posts
Philco 40-120C Filament Wiring
Thank you for your replies. That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM
Philco 46-480 Electronic Restoration
Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM

[-]
Who's Online
There are currently 4366 online users. [Complete List]
» 1 Member(s) | 4365 Guest(s)
Avatar

>