I finally found a good one!
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer. I'll bring some glue and clamps next time I visit to bring it home.
It is missing a clarifier and the dial and glass. I have two parts chassis and a broken cabinet with those parts in tact.
Steve
[Image: http://i1033.photobucket.com/albums/a414...75ed19.jpg]
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
steve
nice find and steal
I`ll be over to pick up don`t tell mike 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-17-2015, 10:51 PM)sam Wrote: steve
nice find and steal
I`ll be over to pick up don`t tell mike
sam
I have to hide it now!
Posts: 16,214
Threads: 562
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have one, I do not need another one.....but nice buy nevertheless.
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks John. It seems there are still a lot of them out there, just never close to me until now.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
 I know where their is a nice old corvette
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-20-2015, 08:34 PM)sam Wrote: I know where their is a nice old corvette
Now I have to hide that too!
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Come on share your toys 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
If you help me put it back together maybe. It is in a least 100 pieces right now.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Nice radio! $60 is a steal 
Posts: 496
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
(01-17-2015, 10:19 PM)SteveJB Wrote: Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer.
That's how I got mine. The previous owner picked it up by the top and just about pulled it off. The front is cracked and you could probably lift it off with out too much effort. It was good to get at the time but I don't see getting to it soon. Good luck with yours.
Henry
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks Henry, the curved veneer is very hard to repair. I will use my other one as a parts set to fix this one.
Users browsing this thread: 4 Guest(s)
|
|
Recent Posts
|
|
6TPZ and 5TPO Radio Help
|
| Oh...and you have electrolytic caps there.
All need to go and be replaced.morzh — 04:36 PM |
|
6TPZ and 5TPO Radio Help
|
| Thanks, will do.R3Sons — 01:25 PM |
|
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
| UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM |
|
Philco 91 Schematic
|
| Hi Rod,
The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM |
|
Just got a 49-1613 need to know...everything!
|
| I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM |
|
B&K 1077B no video
|
| Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
|
B&K 1077B no video
|
| I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
|
RCA 15X
|
| I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
|
B&K 1077B no video
|
| Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
|
RCA 15X
|
| Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM |
|
Who's Online
|
There are currently 7051 online users. [Complete List]
» 1 Member(s) | 7050 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
