Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help reply basics on refinishing
#1

You guys asked so  I am posting pictures on refinish basics on zenith 39a radio in the (other radios section), but I don't know how to add message with each picture. I hope this will help some of you guys that have been asking me to post some things on this subject, I don't have a philco to do at this time other wise I would have posted it in the cabinet section
#2

Fred, you just type in the reply box like you normally would and the put the image below the text and then more text after the image.  For example it would look like this as you compose the post:


Hi I'm Fred...here are my pics showing process XYZ....

[img}https://dl.dropboxusercontent.com/u/54621529/Question.jpg[/img]

and that's how I did it....

(of course the } should really be a ] but if I did that it would not show up in the post so you could see it)

So the post would look like

Hi I'm Fred...here are my pics showing process XYZ....


[Image: https://dl.dropboxusercontent.com/u/5462...estion.jpg]

and that's how I did it....
#3

ooops...now that I posted that reply I see that you are "Attaching" the photos rather than using an off site server like dropbox or photobucket.  

In that case you just have to put any text you want to include before the attached photos like you did when you said "a few more pics" 

(if you want some help getting onto dropbox and adding photos that way, send me a PM and I'll help you.  Its free for up to a gigabyte or two of storage )




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 3071 online users. [Complete List]
» 1 Member(s) | 3070 Guest(s)
Avatar

>