Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How I spent my Sunday afternoon...
#1

....restoring this 1942 Model 42-321T!

OK, two in one weekend...that's a record for me. But this one required very little cosmetic restoration; the finish is all original. I just had to touch up some of the dark trim. Much like the 1948 model I did yesterday, the electronic restoration only required a recap...along with some crumbling wire replacement. Now I didn't replace all of the rubber wire, only those that were either badly cracked or just starting to crack. The others were examined and if they were in no danger of touching anything else and were still somewhat pliable, without cracking when moved, I let them be.

   
   
   
   
   

Greg V.
West Bend, WI
Member WARCI.org
#2

Beautiful job! Icon_thumbup Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#3

This too is a great looking radio.  I've often wondered why the radio manufacturers but the meter band on AM radios.  By the mid to late 30's the US had dropped the usage of meter band below 120 meters. Perhaps to make the customer feel like there are two bands?  Beautiful radio.

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#4

Icon_thumbup Icon_thumbup Icon_thumbup
#5

Great job!! Very nice looking.
#6

looks great Icon_clap Icon_clap Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#7

Very neat, I like the look.

Paul

Tubetalk1
#8

Wow, that looks nice!

No matter where you go, there you are.
#9

As Andy would say "you did one fine job."




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM
Philco 40-155
At last, got this working well. Impressed has really nice reception and tone. Had a bad connection on one of the capaci...rogerh — 07:44 PM
Philco 91 Restore Code ??
Or you could just square the current :lol: As for the values, they are dependent on the 1 or 2-speaker system. The...morzh — 05:46 PM
Philco 91 Restore Code ??
If you know the fc resistance you can use 120 ma nominal current through the resistor to get the voltage drop then calcu...RodB — 05:21 PM
Philco 91 Restore Code ??
Thanks Mike. I at least know why it is there if I don't fully understand it. I see where you talk about a cap and resist...dconant — 04:49 PM
Philco 91 Restore Code ??
Well, this cap you showed cannot possibly, due to the way it is constructed, be 1000pF (0.001). It can be in tens of pF....morzh — 03:13 PM
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM

[-]
Who's Online
There are currently no members online.

>