Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Using Gojo Creme on veneer
#1

I watched a guy on YT do this to his rather nasty looking Philco, and I was amazed with the results! The Gojo Creme is about $2.00 for a good sized jar at your local auto parts store. It cleans the veneer right up! I highly recommend it. Just get a soft cloth and a small helping of the stuff and gently rub it with the grain on your Philco's veneer.


Attached Files Image(s)
   

Slave to an RCA Victor CTC-25
#2

which auto parts store?
#3

Non pumice right?
Works great!

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I got it at O'Reilly. They have pumice, but I did not want to use that in case it would scratch.

Slave to an RCA Victor CTC-25
#5

I just did this with my 40-180. I don't have a before picture but this is the after. I love it and would recommend it to anybody. Works GREAT!


Attached Files Image(s)
   
#6

"Washing" a cabinet with go-jo is a great way to remove the years of attic dirt. It gives you a better idea just what condition your cabinet is in and whether or not you want to refinish. 

I have had many cabinets that literally "came alive" after being cleaned with go-jo. 

NEVER use the go-jo with pumice on a cabinet!!
#7

I also use the go-jo first on any cabinet I get that looks promising, no wood damage that needs repair etc.. Have had good luck with it.
#8

I"ve used it on grimey chasses as well.
#9

Found some at a NAPA store.
#10

I found it at Wallmart in the automotive department. [[hand cleaner]

   Living in Calgary Alberta
#11

Is GOOP the same stuff? Looks the same and smells the same. Its gojos competitor, I found Goop at Walmart, they didn't have gojo. I use it for my hands. Haven't tried yet on wood cabinets.
#12

Yes  goop is same thing as gojo

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#13

I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.
#14

(07-12-2015, 11:42 PM)Edisla Wrote:  I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.

Yes its just for dirt, wax build up? , grime , grudge, grease, grit, finger prints, oil, latex paint, crayons, ink, ant piss, dust, lite water marks, bullet holes, cigar burns, cigarette burns, dryed whiskey, spilt soda, beer, tea, coffee, also repels spiders , roaches, piss ants, silverfish , etc. Icon_wave Icon_wave Icon_wave Icon_wave Just messen around Edisla Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy
#15

I use Non pumice Goop and 0000 steel wool.  I just cleaned up a 46-1203 last night and it came out looking great!  In fact I think I'll change my avatar from the refinished 48-1256 to the original finish 46-1203!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM

[-]
Who's Online
There are currently no members online.

>