Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
I found this 37-61 on ePay. I bought it for $39.99, and, since it was nearby to me in Canton, Massachusetts, I was able to pick it up and save both shipping cost and damage to the radio.The speaker cone is toast. I am going to send it and have it professionally rebuilt. The dial is badly faded, in some spots completely, so I will have to order a new one, but the only repop I can find for the 37-61 is without the lettering I show in the detail picture, nor does it have any other markings like "London" above the shortwave band, just the frequency scales. If anyone knows of a source of a better repop let me know. The pjotofinish is not too badly shot. I may just try some artistic "filing in" using my oil paints, and see what happens before I go whole hog and attempt to reproduce the original. I know that is beyond my skills, whereas I have done oil painting for years, and that seems less daunting to me, and also less destructive to the original finish that remains. Any suggestions about how to "fill in" those little problems before I start would be gratefully heard., so, without further ado, here are some pictures...
[Image: http://41.media.tumblr.com/6a76edc01b52c...1_1280.jpg]
[Image: http://41.media.tumblr.com/f041579b7d965...2_1280.jpg]
[Image: http://41.media.tumblr.com/f303a1183561e...3_1280.jpg]
[Image: http://40.media.tumblr.com/530fd19044b1c...4_1280.jpg]
[Image: http://41.media.tumblr.com/a3b08b005787c...5_1280.jpg]
[Image: http://41.media.tumblr.com/628d824ff82f2...6_1280.jpg]
So, that will be a project for me over the winter. Should keep me amused.
Posts: 178
Threads: 19
Joined: Feb 2014
City: The Motor City,Detroit MI
I love it when there's no rust on the chassis.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 03:17 PM)Kestas Wrote: I love it when there's no rust on the chassis.
Nope, just a lot of dust as far ad I can see.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Nice, I think I saw that but shipping is usually a deal breaker...
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Even the shipping would not have been bad, a tad less than $18, but why risk it when it was 45 minutes up route 95 ? I found a place that makes brand new photofinish decals for this model, so I am going to completely redo the front with one of those. http://www.vintageradiolabels.com/refaux-pro.html Now, to figure out about that dial......
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Mike nice Hope it turns out to be a keeper!
Posts: 4,406
Threads: 415
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
Tubetalk1
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 08:26 PM)Paul Philco322 Wrote: I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
I have actually already e-mailed him a question about this, and await his reply. We shall see.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Paul, I sent him a scan of mine, and he says his is an exact repro, except for the color of the material, which is a bit lighter. I know they darken with age and smoke, so maybe they were a lot lighter brand new than people think. If it is similar, and has the right printing, I will be very happy. Tonight I ordered the dial, so we shall see.
Users browsing this thread: 5 Guest(s)
|
|
Recent Posts
|
|
Philco 46-480 Electronic Restoration
|
| There’s a lot of different search results for trust auto. I did confirm he takes Venmo, but I’ve got one last test. I as...jrblasde — 02:01 PM |
|
Philco 91 Restore Code ??
|
| I did the math to calculate the wattage of the resistor and found to be 47.16 watts using 3275 as fc resistance and your...dconant — 01:30 PM |
|
New member
|
| Hello all. New member here. I bought a Predicta TV for my teenage son (who is into all things vintage, see attached pic...Jsmith5690 — 12:47 PM |
|
Philco 46-480 Electronic Restoration
|
| I’ve asked if they accept PayPal as payment so that I can contest it if the part doesn’t arrive.jrblasde — 12:46 PM |
|
Philco 46-480 Electronic Restoration
|
| Make sure th eperson who answered is not a scammer (lots of these there now) and the Trus A S, whoever they are and wher...morzh — 12:38 PM |
|
Philco 40-120C Filament Wiring
|
| I would disregard everything that is there now. I do not know who and when changed it.
1. Make sure that what you thi...morzh — 12:36 PM |
|
Model 27-84 BUZZ?Humm?
|
| Depends on the type of hum. SOme is made by outside devices.
Try installing an X-cap (0.2-0.5uF) across the AC line, ...morzh — 12:23 PM |
|
Philco 40-120C Filament Wiring
|
| Thank you for your replies.
That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM |
|
Philco 46-480 Electronic Restoration
|
| Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM |
|
Philco 630csx power cord
|
| Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM |
|
Who's Online
|
There are currently 1191 online users. [Complete List]
» 2 Member(s) | 1189 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
