Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

GE F-96 wood repair
#1

I'm working on a F-96 and it has a chunk taken out of it.


[Image: http://i.imgur.com/4fmxl9r.jpg]
Anyone have a better sense of wood identification than me? I'm going to try a veneer patch, but I suppose I better know what wood I'm looking for.
#2

Has the side pulled away for the top?? The contour of the side doesn't look like it matches the top. Are you thinking of refinishing the whole cabinet or just repairing this issues?

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

I am not an expert, but that looks like mahogany, AKA luan plywood.
#4

Im refinishing it completely. I've reglued the loose edge to the top. I've stripped and sanded. I have some veneer samples coming.

I'm not sure how to approach the missing substrate issue.
#5

(08-10-2016, 08:05 PM)kc5gym Wrote:  I am not an expert, but that looks like mahogany, AKA luan plywood.

No, It's not Luan plywood, it's one of the mahogany look a likes, sapele. or possibly quartersawn makore. G.E listed what sort of veneers they used in their advertising and I think that they liked to use one of those veneers, particularly of the ribbon striped variety, on their cabinets in the 1938 and 39 model years.
 
http://www.wood-database.com/lumber-iden...ds/makore/

http://www.wood-database.com/lumber-iden...ds/sapele/

Regards
Arran
#6

(08-12-2016, 03:38 AM)Arran Wrote:  
(08-10-2016, 08:05 PM)kc5gym Wrote:  I am not an expert, but that looks like mahogany, AKA luan plywood.

No, It's not Luan plywood, it's one of the mahogany look a likes, sapele. or possibly quartersawn makore. G.E listed what sort of veneers they used in their advertising and I think that they liked to use one of those veneers, particularly of the ribbon striped variety, on their cabinets in the 1938 and 39 model years.
 
http://www.wood-database.com/lumber-iden...ds/makore/

http://www.wood-database.com/lumber-iden...ds/sapele/

Regards
Arran

That Makore looks like a possibility.
#7

(08-12-2016, 07:40 AM)Tgace459 Wrote:  
(08-12-2016, 03:38 AM)Arran Wrote:  
(08-10-2016, 08:05 PM)kc5gym Wrote:  I am not an expert, but that looks like mahogany, AKA luan plywood.

No, It's not Luan plywood, it's one of the mahogany look a likes, sapele. or possibly quartersawn makore. G.E listed what sort of veneers they used in their advertising and I think that they liked to use one of those veneers, particularly of the ribbon striped variety, on their cabinets in the 1938 and 39 model years.
 
http://www.wood-database.com/lumber-iden...ds/makore/

http://www.wood-database.com/lumber-iden...ds/sapele/

Regards
Arran

That Makore looks like a possibility.

 Better strip some of the original finish off, just to make sure, G.E was like many manufacturers in that their cabinets had a tinted finish over everything to even out the variations in wood grain.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New member
Good picture, When was it taken? You don't look in it like a guy who has a teenage son :)morzh — 06:13 PM
New member
Love the pic! I'm southern IL, so wouldn't be much help and Bob Anderson is very good on those, but lives in Chicago are...TV MAN — 05:25 PM
Philco 40-120C Filament Wiring
:thumbup:klondike98 — 04:56 PM
Philco 40-120C Filament Wiring
With these values I think you are OK; the Cmax for this tube is 40uF. Your Vbb could rise a bit, but probably not too mu...morzh — 04:53 PM
Philco 40-120C Filament Wiring
BTW, someone had replaced the original 20uF/20uF filter cap with a 47uF/33uF cap. Do you think these values are safe on ...bluecap — 04:33 PM
Philco 40-120C Filament Wiring
You're correct. I was misinterpreting the key position. I now know where it is, and things are making sense. I appreciat...bluecap — 04:29 PM
Philco 40-120C Filament Wiring
I think Morzh has a good thought. Check the key position. The under chassis diagram in the Philco info shows an “H” for ...klondike98 — 04:25 PM
Philco 630csx power cord
Yes, the third wire goes to the stud on the side and is separate from the other two. I've usually used cloth covered ...Tynwald — 03:09 PM
New member
Have you tried Alabama Historical Radio Society? They possibly could recommend someone. I remember a name of Dee Hanes...morzh — 03:08 PM
Philco 46-480 Electronic Restoration
Nope, he can’t tell me the dimensions. Looks like I won’t be buying it.jrblasde — 02:38 PM

[-]
Who's Online
There are currently 4760 online users. [Complete List]
» 2 Member(s) | 4758 Guest(s)
AvatarAvatar

>