Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

R.C.A. Site For Those Restoring An R.C.A.
#1

This is a site that anyone restoring an R.C.A. radio or phonograph should visit. Here you will find the service manuals that cover ALL these sets. I have downloaded ALL of these manuals and service bulletins. I'd advise anyone else interested to do the same.
https://www.americanradiohistory.com/RCA...ervice.htm
#2

Thanks Mike!  I needed it.  Icon_lol
#3

While you're on that site, after downloading all the RCA stuff, go to the home page, and start to browse around. There's a TON of cool information on radio history there.
#4

+1. I found many of the old UK radio magazines which I used to enjoy, and much more besides.

I don't hold with furniture that talks.
#5

Those RCA manuals do come in handy.  My huge G.E. J-100 cathedral uses the same chassis as an RCA R74 so those very comprehensive RCA service manuals can come in handy for many G.E. radios also.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 9390 online users. [Complete List]
» 2 Member(s) | 9388 Guest(s)
AvatarAvatar

>