Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 20 Restoration
#1

Brand new user here...

I have a Model 20 I found on fleabay that, unfortunately, did not arrive in "working condition" as advertised originally.  Chassis was not secured to the cabinet, and rough handling in shipping caused some damage.  Also, a previous owner did some work on the radio and I don't think the work is electrically safe.  Not to mention a wire from one of the transformers is loose...

Who specializes in restoring these old radios using modern electrical components to replace old ones?  Ideally would retain the vintage look, just have new parts inside the old housings.  Cabinet is going to need a bit of work, as the grille has a couple places where it is broken...plus just general rehab work.

I'd do the work myself, but am brand new to this and it would be a years-long project for me to learn details of electronics (capacitors have a polarity that doesn't always agree with the stamping on the case--would need to test parts using an oscilloscope or other equipment I don't have, etc.)

Thanks in advance for helpful replies.
#2

Welcome!

"Working condition" from eBay..... unless you personally know the seller, I would not rely on this statement.

I would advise to find your local antique radio society or club and ask them for help.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Welcome to the PHorum!
Icon_wave

You can try a couple things.  Put a query in the Wanted Ads section and see if there is someone on the Phorum that might be near enough to you and interested in helping out with the restoration.

The MAARC  Mid America Antique Radio Club is in the Kansas City area and you could contact them to see if there are members who are interested and able to help you out.

There are also restorers who you can ship the set to and they will ship it back, but as you are painfully aware, shipping can be an issue.  There are ways to ship these radios successfully although 20s have a fragile grill.  A few of these restorers are in our Resources section under Radio Repair and Restoration.  (including a couple that are about a 9 hour drive from you)
#4

http://www.ontheair3.com/index7.html

Perhaps you can check these guys out, no personal experience, not too far I thinks.
Good luck, 

Paul

Tubetalk1
#5

Shipping 20 cathedral should be avoided unless unavoidable.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM

[-]
Who's Online
There are currently 4138 online users. [Complete List]
» 3 Member(s) | 4135 Guest(s)
AvatarAvatarAvatar

>