Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Polishing chassis components questions
#1

Morning all -

I'm finishing up a 38-9 and have completed re-stuffing the caps and bakelite blocks.  (Steve Davis, the tools I got from you worked great, thank you)

While I've polished plenty of automotive components over the years, is there a preferred method for polishing radio chassis components?  I have the tools for grinding and polishing but is there a specific polisher everyone is using to make these components look like new?

Thanks all,
Paul
#2

So what parts are you thinking of polishing??

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

The zinc plated stuff won't stay polished for long.

Be careful, some manufactures used cadmium plating (yellow fuzzy oxidation) which can be very bad for you if inhaled.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#4

Member Geoff has some pretty detailed threads where he is very meticulous at cleaning and polishing the chassis parts.  While I know he has done Philco before but all I could find was his thread on a Zenith:

https://www.philcoradio.com/phorum/showt...p?tid=4917

He likes to use Simichrome polish but I think any good metal polish would work pretty well.

[Image: https://antiqueradios.com/gallery/main.p...alNumber=2]

The above is a picture from his thread.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

Very nice looking. While I will say that I like to fix radios I have to say I don't really restore them to like new condition. I would never polish an escutcheon unless it was rusted maybe but I am at odds at polishing the old copper electrolytics.
                                                          Henry
#6

I am lazy Icon_lol Icon_lol  Icon_lol Icon_lol

Unless some set was very unique and a great find I just try to avoid those that may have heavy rust or are really grundgy. Unless it was a real special one. Much like the eternal cabinet disussions the call to make it look new or to have that patina or authentic aged look is really one for the owner. That chassis looks beautiful, despite what your taste is I admire the skill and workmanship.

Paul

Tubetalk1
#7

I don't like to over polish an escutcheon but I did polish the Mershon caps in my 70 and 90.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#8

All great points. I've only made repairs and haven't polished radio components to like-new condition either and was wanting to give it a shot with all this extra time at home. After Terry asked which components it appears the options are limited on this set. Been reading up on past 16b restorations as I prepare to start mine and the polished Mershon caps caught my eye.

I'm trying to avoid getting too lazy myself Paul! I also collect antique Smith & Wesson's and in that world the aged patina is desirable, much like furniture.

As always, thanks for your input guys.
Paul
#9

I am developing patina as I typeIcon_smile. Paul

Tubetalk1
#10

Icon_lol

Your value is increasing by the minute!
#11

I am getting too much patina. Too much grey and starting to shine some on top!.
                                          Oh well,
                                                Henry
#12

I've heard that a good soak in vinegar takes off a good amount of tarnish and such...

To get back on subject just to clean the aluminum cans up a bit I've used a soft Scotch Brite pad (white one) and some WD-40. It's good for cleaning up the corrosion on the tops. On some of the sets the IF shields are spot welded together so they come off as one unit.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#13

Thank you for the tips Terry. Very much appreciated.

Paul




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Thanks Chas, sure will give it a look!morzh — 03:39 PM
An attempt to remove the Field Coil from a G speaker
Mike, Lookup  murrayatuptown on ARF. Seems he has a dilemma with surplus field coils. Could get lucky and have what y...Chas — 01:26 PM
Atwater-Kent 84, restoration.
Hello Mike, I have not checked to see if my console has a fuse or not and far as sets go I have early 30s General Motor...radiorich — 11:25 AM
Atwater-Kent 84, restoration.
Ron I forgot, but when you said "phone number", I remembered, caus I usually remember how I act when I need...morzh — 11:12 AM
Atwater-Kent 84, restoration.
You have an extensive collection of Philcos, Mike! I’m always excited to see each new one. Agreed on the power supply fu...jrblasde — 10:50 AM
462ron
Hi Mike, that 84 sure looks great. You don’t often see these antique radios with a fuse like yours has. I usually instal...462ron — 10:22 AM
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM

[-]
Who's Online
There are currently 3378 online users. [Complete List]
» 1 Member(s) | 3377 Guest(s)
Avatar

>