Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A little advice
#1

I am considering the purchase of a philco 38-2670 tombstone and was hoping someone that is lucky enough to own one of these beauties could comment on the sound the radio produces. The person selling says it is really exceptional in volume and audio quality.
I can usually find a you tube video of any radio I’m looking at to at least get an idea but not this one.
I have not been able to even find the speaker size so it must be a fairly rare radio.
Any comments on what I should be paying would be appreciated, it is fully restored. Thanks in advance
#2

Looks like the spkr is an 8" the console uses the 10 1/2". The output stage is the super class A style (mostly found in console models) using 6F6's rather than than the older standard base 42's. It's a little different it has a phase inverter stage instead of a 42 driving the pair of 42's thru a transformer. Performance wise it should be able to blow the spkr out of the cabinet. Rf/IF wise nothing too exciting rf amp, pentagrid mixer, single IF amp, and det/avc circuit.

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

So if you were using an external source for music or news or whatever it should preform very well.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM

[-]
Who's Online
There are currently 10206 online users. [Complete List]
» 3 Member(s) | 10203 Guest(s)
AvatarAvatarAvatar

>