Did Philco Make a Good AM-FM Table Radio?
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
I thought I would ask this seeing as I now have a couple good Zeniths and finally have a good RCA AM-FM table radio in my stable. Did Philco make a good AM-FM table radio and what model would it be? So far I have only seen small units in poor shape around here, so the jury is out on that for me. It seems odd to have two of what I consider the original 'Big Three' of radio sales represented without a Philco example.
No matter where you go, there you are.
Posts: 1,528
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Well I guess it depends on what year you're interested in. The first table model with FM is one of the best, the 48-482. A huge beast, basically a console in a table model. Has AM/FM and short wave.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Year doesn't really matter here, just in the tube era I would say. I have seen a few 48-482's in my area over the years, but they are usually trashed like most other late 40's Philcos are that I find around here. Also, it seems people's pets and kids loved to rip out both the grill cloth and the speaker cones in units I see.
No matter where you go, there you are.
Posts: 5,123
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
The 48-482 I restored had a great sound. Gave it away as a gift.
Posts: 1,229
Threads: 28
Joined: Jan 2014
City: Wellborn Florida
I would vote for Philco model 53-956 my only Philco AM FM. Found at the local flea market summer of 2011.
Posts: 4,402
Threads: 414
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have often been leery of FM Philco due to their reluctance to pay for the "Armsrong System".
Paul
Tubetalk1
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks for the advice thus far. I almost bought a model 53-956 a few years back, but was a bit hesitant at the time and missed out. I was looking at a nice condition 49-906 with a bad cord today, but am trying to research that one first. I have a big Philco AM-FM and it's matching console from 1948 that both use two 117Z3 rectifier tubes. The console is fair, but tries to play and the table unit has a livable cabinet, but the best way to describe the inside is 'bio-hazard'. Some critters made a mess in there! In spite of that, it tried to power up and I got a little audio out of it. Not sure what to do with those two.
Edit: They are 1949 models. The table 'bio hazard' one is a 49-909 and the console is either a 49-1100 or 49-1101. Had them for a while.
No matter where you go, there you are.
(This post was last modified: 09-15-2020, 02:55 PM by Jayce.)
Posts: 4,402
Threads: 414
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Maybe clean out the old nest, and then give it a check up. Paul
Tubetalk1
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
There's no nest, just plenty of droppings... Chassis isn't too bad, but the screws that hold the chassis in on one side are totally rusted. If I could get it out I MIGHT have a chance to clean out the cabinet and chassis. I don't think it was mice that left the crap in this radio, it almost looks like from birds or other critters.
No matter where you go, there you are.
Posts: 4,402
Threads: 414
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Wear a mask and gloves, wipe it out with alchohol on a rag or such. Be careful.
Paul
Tubetalk1
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
The list of my radio & TV collection!
|
Hello Peter,
Thank you for posting that !!
Sincerely Richardradiorich — 09:40 AM |
Eico 232 VTVM Schematic
|
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM |
Eico 232 VTVM Schematic
|
Try BAMA for a schematic.
Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM |
Eico 232 VTVM Schematic
|
Is that a battery holder?morzh — 04:43 PM |
Eico 232 VTVM Schematic
|
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM |
Var resistor id
|
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should
know wher...morzh — 03:23 PM |
Var resistor id
|
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms.
This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM |
Var resistor id
|
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM |
The list of my radio & TV collection!
|
Thanks Richard. I hope you enjoy it.
Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM |
The list of my radio & TV collection!
|
Hello RadioSvit,
first all happy new year !
I will watch your new videos this week.
Sincerely Richardradiorich — 09:19 AM |
Who's Online
|
There are currently 9777 online users. [Complete List] » 2 Member(s) | 9775 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|