Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

42-322 notes - location ???
#1

Klondike had some notes at one point about the restoration of a 42-322. Anyone know where they are?
The link I found doesn’t seem to work. 

I’m specifically looking for details about dealing with the rewiring of the switch etc to deal with the hot chassis and power switch etc.
#2

Here's the thread in the Phorum. and here's a pdf of notes I made (the embedded pdf's in the notes are no longer active).

I don't think I talked about the switch but you can read through it. This was my first restoration so I didn't really know what I was doing Icon_confused These sets usually had the neutral side of the power connected to the on-off switch and if I did anything I would have changed that so the hot side went directly to the switch.

Hope that helps.
#3

Thanks. This was quite helpful. I plan to put in a fuse as well as re-wire the power switch as you suggest along with a polarized plug. I’ll research this more and see what else I need to do from a safety perspective.
I only do these AA5 units once a year or so so I always have to look that up every time.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 5913 online users. [Complete List]
» 1 Member(s) | 5912 Guest(s)
Avatar

>