Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 60 not happy to go back in cabinet!
#1

Seems like the cabinet re-entry process is a touchy process, at least for me with my limited experience. Model 60 was working fine on the outside. Now it is howling and oscillating. Even with tube shields. I am wondering if somehow the 42 tube or the 6A7 tubes are shorting out. Any help would be greatly appreciated. This new problem just cropped up.
#2

Crazy. I pulled the 42 and 6A7 and then reinserted. Radio plays. I am wondering about a loose pin contact or something similar. The radio is in the normal position, not on its side or back. Any thoughts on a hit or miss howling, motorboating, oscillating symptoms. Thanks.
#3

Sounds like you should clean up the tube pins and sockets with deoxit, you can sweat the pins on the tubes and add a little bit of solder to be sure, retention the contacts of the socket gently with a pick or needle, let everything dry out, and you should be fine.

One more thing, make sure there is nothing hanging down or sagging that will compress to a short when chassis is upright.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-480 Electronic Restoration
It’s been too cold to solder in the garage the last couple of evenings, but it has allowed me more time to search for th...jrblasde — 07:23 PM
An attempt to remove the Field Coil from a G speaker
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM
An attempt to remove the Field Coil from a G speaker
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM
An attempt to remove the Field Coil from a G speaker
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM
Philco 89 indicator light.
Well thankfully that did not happen.Jim Dutridge — 05:21 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM

[-]
Who's Online
There are currently 8485 online users. [Complete List]
» 1 Member(s) | 8484 Guest(s)
Avatar

>