Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-190 bezel color question
#1

So I'm cleaning a lifetime of dirt off of the metal bezel with some green cleaner and while dirt is coming off, I'm left with areas that look like something ran down the bezel. So I try some alcohol and quickly realize that I'm removing the gold paint on the bezel. That's OK because I couldn't have put it on the radio looking like it did. So has anyone spray painted one of these bezels? I would describe it as a mat light gold color. Just go to Lowes and see what I can find?
#2

I found a thread answering this question.
#3

Although the paint recommended in that thread, Valspar Plasticote, was not available locally. So I picked up Valspar Brilliant Gold 66009 at Lowes. First coat was too thick and I got some noticeable orange peel. Quickly removed that with some alcohol and did 2 thin coats. I'm 100% satisfied.

With flash:
[Image: http://i191.photobucket.com/albums/z309/...file-8.jpg]

w/o flash:
[Image: http://i191.photobucket.com/albums/z309/...file-7.jpg]
#4

Hum. Mine isn't gold it is a nickle (plated?) color. I have had that radio for 30 years, so it is hard to remember, but I think it has always been that color.
#5

Quote:it is a nickle (plated?) color

Yes, it may be that color. Not plated, though, because alcohol takes it off easily. Like this?:

http://www.radioatticarchives.com/radio.htm?radio=2034

This one may be repainted; it's very close to mine now:

http://www.radioatticarchives.com/radio.htm?radio=2036
#6

When I stripped all the sexy gloss black off my escutcheon, I found traces of the original color underneath. I'd say yours is definitely in the right area. And funny you should mention, I think I bought the last can of the closest-thing-to on the west coast... I haven't seen it anywhere since.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. - your 0.047 caps are fried in both Th...morzh — 10:40 PM
Philco 630csx power cord
Hello Tynwald , I would not use that plug and what I would do is us Some of this cloth covered wire ! you can also buy...radiorich — 10:28 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM

[-]
Who's Online
There are currently 2834 online users. [Complete List]
» 3 Member(s) | 2831 Guest(s)
AvatarAvatarAvatar

>