Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My two Marietta finds.
#1

There was surprising little to find in Marietta, Oh radio-wise in the antique shops and the flea market. Mostly postwar table radios, but I did find two hidden jewels. The first is a nice little Airline table radio. One of the bakelite models you find as a replica or an overpriced original. This one surprised me as it was priced cheap and it wasn't a replica! The second radio I almost missed because it blended in with the wall it was up against. A Serenader cathedral radio. Missing the tubes and the knobs, but the price was right and the cabinet is solid in spite of its looks. A little four tube unit that I guess as made in Canada.

   

   

   

No matter where you go, there you are.
#2

If the price is right, the price is right.

Our national saying goes as ""Free vinegar tastes sweet!"

Icon_lol

Congrats! Now you have something to busy yourself with!
#3

I was a little shocked at the lack of old radios in the stores around Marietta. Also, not a single Victrola or wind-up, which you usually see at least one of per antique shop around here.

No matter where you go, there you are.
#4

Remember that what you have is a "snapshot" of that area's pickings that is valid for that weekend only.

You must continue to visit this area and other areas as often as possible. Hand out your phone number to the shops. Even if only one percent of them result in a "find," it is one percent more than you would have if you did not do this.
#5

I don't recall seeing a replica of that Airline, usually the one you see is a replica of one of those bullet shaped Belmonts with a crescent shaped dial opening. The reason being is that one was featured in the Phillip Collins book "Radios the Golden Age" back in the 80s, the replicas often have a cassette player slot in the side and a plaque on the front that says either Thomas or Crosley.
In any event there was a craze on these for a while, the bullet shaped Belmont much more so then the Airlines, at least until the supply outstripped the demand, unlike most Catalin models Bakelite sets were produced in much greater quantities. At one point they were hitting $200-300, which of course flushed more of them out of the woodwork, and being Bakelite AC/DC sets there were many more in the woodwork. Add to that all of the ones that were cracked, chipped, filled, and repainted, and the supply was increased even more.
I don't know about that particular Airline but some of them of a six tube chassis with an extra RF stage, so they should be pretty decent performers. So it may earn it's keep by being a decent radio and not just a pretty face.
I can't comment on the specifics of the Serenader model, most Serenader sets were made by Grimes-Phonola later Dominion Electrohome and were sold by "The Robert Simpson Company" stores or through their catalog. What I find strange is that this set does not seem to have a brass plaque on the back of the chassis nor an Ontario Hydroelectric Power Commission approval decal. So this set may be Canadian or it may be one of of the many generic table radios produced by one of the American independents. If you could show a closeup of the dial escutcheon that would help.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
1 - 0v - correct 2 - 0v - correct 3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM
B&K 1077B no video
I'm going to get back into it tonight. but I disconnected the 2 main resistors off this supply going to different parts ...TV MAN — 04:04 PM
6TPZ and 5TPO Radio Help
Sorry. The test points are as follows: 1 - 0v 2 - 0v 3 - 0v 4 - 12v 5 - 0v 6 - 11.9v 7 - 12v 8 - 12v 9 - 12v...R3Sons — 02:09 PM
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM

[-]
Who's Online
There are currently 5714 online users. [Complete List]
» 2 Member(s) | 5712 Guest(s)
AvatarAvatar

>