Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Did Philco Make the 80 Jr. only in 1932 and 1933?
#1

Hi guys,

Can any of you tell me if Philco only made the 80 Jr. in 1932 and 33. I have some original service info for this model. They discuss some production run changes after run#5. I know my run is #7, but how many runs did they make and what years did Philco strictly make the 80 Jr. Can anybody also tell me if the 80B (Baby Grand) is also the same thing or was this different from the 80 Jr. Quite a simple circuit and I am lucky all my coils check good Icon_biggrin.

This is a far-fetched idea, but what confuses me is that nostalgia air shows pre October 1937 on the year before you open the PDF schematic, and does 1936 written with a line through it on the bottom of my case mean the year 1936?

Thanks for your help.

Jon


Attached Files Image(s)
               
#2

The 80 Jr. (which includes the 80B cathedral, 80C table model and 80P portable) was introduced in the Fall of 1932. Around the same time, Philco began to modify their 51/52 Colonial Clock cabinets to accept model 80 chassis. I have an 80 Colonial Clock. Anyway, it appears the 80C, 80P and 80 Colonial Clock were not high-production items, and were off the market by May 1933 if not before.

From my research, it appears the the 81B was introduced around January 1933. Both the 80B and 81B remained on the market until January 1934, when both the 80 and 81 were discontinued and replaced by the then-all-new 84B.

--
Ron Ramirez
Ferdinand IN
#3

Ron, is there a way to gauge what year a 80 Jr. is by looking at it's production run number?

Thanks

Jon




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM

[-]
Who's Online
There are currently 8903 online users. [Complete List]
» 1 Member(s) | 8902 Guest(s)
Avatar

>